miércoles, 29 de julio de 2020
VSR700 Helicopter prototype performs first autonomous free flight
Marignane, 28 July 2020 - The prototype of Airbus Helicopters’ VSR700 unmanned aerial system (UAS) has performed its first free flight. The VSR700 performed a ten minute flight at a drone test centre near Aix-en-Provence in the south of France.
This is a significant step in the programme following the first flight in November 2019 when the prototype was tethered to comply with regulatory requirements. To enable this free flight, Airbus Helicopters implemented geofencing, a virtual perimeter, which enabled and justified a flight clearance from airworthiness authorities for free flight. The flight test programme will now evolve to progressively open the flight envelope.
“The free flight achieved by the VSR700 is a major step leading up to the sea trials that will be performed at the end of 2021 as part of the de-risking studies for the French Navy’s future drone,” said Bruno Even, Airbus Helicopters CEO. “Thanks to the French PlanAero, the programme will make full use of two demonstrators and an optionally piloted vehicle to develop and mature the technical and operational aspects for successful UAS operations in a naval environment.”
The VSR700, derived from Hélicoptères Guimbal’s Cabri G2, is an unmanned aerial system in the 500-1000 kg maximum take-off weight range. It offers the best balance of payload capability, endurance and operational cost. It is capable of carrying multiple full-size naval sensors for extended periods and can operate from existing ships, alongside a helicopter, with a low logistical footprint.
This VSR700 prototype has evolved over the last nine months since its maiden flight. The programme implemented the geofencing function, as well as a Flight Termination System allowing the mission to be ended if necessary. Modifications have equally been performed to the air vehicle, alongside autopilot software evolutions and updates, as well as structural modifications and reinforcements.
[España] Indra se incorpora como contratista del Estudio de Concepto del FCAS
- Firma una enmienda al contrato que iniciaron Dassault Aviation y Airbus D&S GmbH en 2019 para tener el mismo papel que estos y para que la industria española se incorpore a los trabajos del Estudio de Concepto Conjunto del programa NGWS/FCAS
- Alcanza acuerdos industriales internacionales que le permiten consolidar su posición en la fase de demostradores, en la que liderará el pilar transversal de coherencia entre pilares/SIMLAB, liderará el pilar de Sensores y FCMS y participará como socio principal en la Nube de Combate
Indra, una de las principales compañías globales de tecnología y consultoría, ha reforzado su participación en el programa europeo de Defensa NGWS/FCAS (New Generation Weapon System/Future Combat Air System), al incorporarse formalmente a la ejecución de los trabajos del Estudio de Concepto Conjunto (Joint Concept Study – JCS) que iniciaron Francia y Alemania en febrero de 2019.
Indra ha firmado una enmienda contractual que sitúa a la compañía como contratista del Estudio de Concepto Conjunto, junto a los coordinadores nacionales de Francia (Dassault) y Alemania (Airbus). Como órgano de contratación ha firmado la DGA francesa, que actúa en representación de los Ministerios de Defensa de Francia, Alemania y España.
Con esta enmienda se materializa el acuerdo que Indra ya tenía cerrado con Dassault y Airbus, que supone la incorporación definitiva de la industria española al Estudio de Concepto, y un notable paso adelante en la participación industrial española en el programa NGWS/FCAS, habilitando la intervención del resto de los líderes españoles del programa: Airbus, ITP y SATNUS.
Indra afianza así su papel de coordinador de la industria española en el programa y representante de la misma frente a los coordinadores industriales de Francia y Alemania.
El Estudio de Concepto Conjunto tiene la ambición de investigar y definir capacidades y arquitecturas comunes para el sistema de sistemas NGWS, definir y actualizar las hojas de ruta de desarrollos de tecnología que se necesitan para alcanzar los objetivos funcionales y operativos y establecer el marco programático para todas las fases de ejecución del programa.
Además de este logro en el Estudio de Concepto, Indra ha avanzado en otras vías reforzando su posición como líder español de cuatro de los ocho pilares en los que se ha estructurado el programa. La compañía ha firmado acuerdos industriales internacionales para liderar junto Dassault y Airbus los dos pilares transversales (el citado de Estudio de Concepto del sistema y el de coherencia entre pilares), para liderar el Pilar de Sensores trabajando con Thales y FCMS y para participar como socio principal, al igual que Thales, en la Nube de Combate liderada por Airbus en Alemania.
El papel de Indra como coordinador en el programa NGWS/FCAS tiene como objetivo asegurar que la industria española alcance el máximo nivel de participación. Su desarrollo generará altas dosis de conocimiento y valor añadido para las empresas españolas y les proporcionará la oportunidad de desarrollar productos punteros, tanto en el ámbito de la defensa como en el civil. La nominación de Indra como coordinador nacional industrial del programa asegura el máximo retorno del programa para la industria española y la soberanía sobre las tecnologías desarrolladas por sus empresas.
El compromiso de Indra como coordinador nacional español es que exista el máximo retorno y de la más alta calidad del programa NGWS/FCAS para toda la industria española (de Defensa y civil). Todo ello en forma de generación de negocio, desarrollo de su capacidad exportadora, creación de tecnologías utilizables también en el ámbito civil y generación de empleo de alto valor.
Indra, como coordinador nacional, representará los intereses de toda la industria nacional respetando la independencia de las distintas empresas que participen en el proyecto y reforzando su posición en relación con las empresas de las demás naciones partícipes.
Está estimado que el programa generará en las próximas décadas inversiones de miles de millones de euros tanto en la fase de desarrollo, como posteriormente en la de producción. Las primeras estimaciones hablan de un potencial valor económico del programa de 300.000 millones de euros en los próximos 40 años.
Embraer Develops Cargo Transportation Solutions for Commercial Aircraft
São José dos Campos, Brazil – July 24, 2020 – With the significant
decline in the number of airline passengers and the booming demand for
air cargo capacity, Embraer has developed cargo transportation solutions
for its line of commercial aircraft. With fewer commercial flights,
which carry both passengers and freight, there’s a critical need for
more cargo space.
“Embraer’s engineers rose to the challenge when our customers asked them
if they could find a way for their Embraer airplanes to carry more
cargo payload,” explained Johann Bordais, President & CEO, Embraer
Services & Support. “Today, customers can choose from a portfolio of
solutions to carry cargo in the cabins of their EMB 120s, ERJ 145s, and
E-Jets.”
ANAC, Brazil’s civil aviation regulatory authority, has granted
exemption for the carriage of additional freight on Embraer passenger
aircraft. Embraer published Technical Dispositions for the ERJ 145 and
E-Jets families of commercial jets, including the E-Jets E2s, which
explain how to accommodate cabin freight. A Service Bulletin is
available for the EMB 120.
In addition to placing small packages in overhead bins and stowage
compartments, cargo items can be placed on each seat, subject to certain
restrictions. The payload capacity is significant. For example, a fully
loaded 96-seat E190 can carry 6,720 lb (3 metric tonnes) of cabin
freight in addition to under floor cargo. A 118-seat E195 can carry
8,260 lb (3.75 metric tonnes).
Customers can opt for a floor-mounted freight configuration if their
cargo cannot fit on passenger seats. This solution permits the removal
of up to 70% of the passenger seats, with the remaining areas
accommodating for items on the cabin floor. Freight must be contained in
approved netting that attaches to the inboard and outboard seat tracks.
This solution has already been developed for a first generation E195
jet for Azul Cargo, in Brazil.
Cabin payload capacity for the ERJ145 is up to 1,750 lb (0.8 metric
tonnes) and up to 5,194 lb (2.36 metric tons) for the E190-E2. For
customers needing even more capacity, Embraer may offer a Service
Bulletin for full cargo configurations, as has been done for the EMB
120. These layouts give operators the flexibility to carry larger
floor-mounted freight items in the cabin.
martes, 28 de julio de 2020
lunes, 27 de julio de 2020
domingo, 26 de julio de 2020
viernes, 24 de julio de 2020
miércoles, 22 de julio de 2020
International industry collaboration on future combat air capability | BAE Systems | International
https://www.baesystems.com/en/article/international-industry-collaboration-on-future-combat-air-capability-takes-a-significant-step-forward
Press release
UK, Sweden and Italy have begun trilateral industry discussions to strengthen collaboration between the three nations, as they develop world-leading future combat air capability.
The new trilateral framework sees industry from the three nations bringing together their skills and expertise in the combat air sector to collaborate on the research and development of cutting-edge technologies.
The three national industries comprise leading defence companies from the UK (BAE Systems, Leonardo UK, Rolls Royce and MBDA UK), Italy (Leonardo Italy, Elettronica, Avio Aero and MBDA Italia) and Sweden (Saab and GKN Aerospace Sweden).
Today's announcement builds on bilateral discussions which have taken place between the UK and Swedish and Italian industries and establishes a trilateral industry group. Together, the companies will assess common routes to future combat air capability using their know-how, expertise and technology development activities across current and future combat air systems.
This framework is another step on the path towards a full agreement between these national industries to formalise areas of joint collaboration on future combat air systems development.
These national industries each directly employ tens of thousands of people and support many more highly skilled jobs through their supply chains, underpinning national security and supporting economic prosperity in the UK, Sweden and Italy.
Charles Woodburn, Chief Executive Officer, BAE Systems, said: "International partnering provides the best opportunity to deliver a capable, flexible and upgradeable combat air system. We've made good progress with Saab and Leonardo in identifying shared goals and expertise and through this new framework, we can build on this collaboration to unlock the huge potential across our three nations."
Alessandro Profumo, Chief Executive Officer, Leonardo, said: "All three national industries fully grasp the historic nature of this moment. Tempest will be the cornerstone of a cross-border system of common defence which will extend far beyond combat air. It will secure enormous economic benefits and vast industrial and technological progress for Italy and our partners. Together, we share an understanding that if we get this right now, our respective aerospace and defence industries will thrive for a generation."
Micael Johansson, Chief Executive Officer, Saab, said: "Combat Air is a key component of Sweden's defence policy and it is defined as a national security interest. Saab is therefore taking these important steps to remain at the forefront of System of Systems development and the advanced technologies within Combat Air. We welcome the leadership by the Swedish and UK government, as shown with their July 2019 MoU, and are pleased to deepen our relationship with Italian industry. Our announcement of an initial £50m Future Combat Air investment and a new FCAS centre in the UK, will contribute to closer working relationships with the other FCAS industrial partners and the UK Ministry of Defence."
The UK has existing co-operation with Sweden and Italy. All three nations' industries and militaries are partners in the joint development and operation of the Meteor beyond visual air-to-air missile that is arming Gripen, Eurofighter Typhoon and F-35. Swedish-made chaff and flare dispensers are used on UK Typhoons and Saab's Giraffe radar is a key part of the UK's Sky Sabre ground defence system. Swedish Gripen E aircraft are equipped with radars designed and built by Leonardo in Edinburgh. Meanwhile, both the Royal Air Force and the Aeronautica Militare operate the same, potent fleet of Eurofighter Typhoon and F-35 aircraft, part of more than 50 years of close collaboration in combat air.
Suscribirse a:
Entradas (Atom)
